MacDon M205 Operators Manual - Manual (Page 321)

MAINTENANCE AND SERVICING
2. Remove the five screws (A) securing the control panel
(B) to the console.
3. Remove the control panel (B) and store in the tray.
Figure 5.43: Header Control Panel
4. Remove the three rubber nuts (A) securing the switch
support plate (B) to the console.
NOTE:
For clarity, console in the image was made
transparent to show the switch support plate (B).
Figure 5.44: Console (Transparent)
5. Move the switch support plate (A) on top of the
console (B).
Figure 5.45: Switch Support Plate
169887 305 Revision A