MacDon M205 Operators Manual - Manual (Page 88)

OPERATOR’S STATION
Double Windrow Attachment (DWA) / Swath Roller Switch (if installed)
With Double Windrow attachment
• If switch (A) is installed in the console, the DWA deck
is raised with switch in position (C) or lowered in
position (B). The cab display module (CDM) must be
programmed for this configuration, refer to
Activating
the Double Windrower Attachment (DWA), page 103 .
Switch (A) may be used in lieu of the DWA switches on
the ground speed lever (GSL).
With Swath Roller attachment
• The roller is raised by pressing switch (A) to position (C)
or lowered with switch in position (B).
Figure 3.61: Console Switches
169887 72 Revision A