MacDon M205 Operators Manual - Manual (Page 266)

OPERATION
Figure 4.218: Operator Console
CAUTION
Check to be sure all bystanders have cleared the area.
1. Set the minimum reel speed as follows:
IMPORTANT:
Set the minimum reel speed while stationary with the ground speed lever (GSL) in the N-DETENT position.
a. Engage header.
b. Set HEADER INDEX switch (B) to ON.
c. Press the DISPLAY SELECTOR button (E) on the GSL to display ##.## MIN REEL at (A) or press the
FAST (C) or SLOW (D) switch.
The displayed value (##.##) = rpm or mph or km/h 12
d. Press FAST (C) or SLOW (D) until the desired minimum reel speed is achieved.
2. Set the reel index as follows:
IMPORTANT:
Reel index can only be adjusted while operating at a ground speed faster than minimum reel speed
plus header index value.
a. Set HEADER INDEX switch (B) to ON.
b. Press the DISPLAY SELECTOR button (E) on the GSL to display ##.## ##.# REEL IND 13 or press FAST
(C) or SLOW (D) switch.
12. Depending on CDM programming.
13. REEL IND will only be displayed when operating at a ground speed faster than minimum reel speed plus header index value.
169887 250 Revision A