Replacing headlight bulb – MacDon M205 Operators Manual User Manual
Page 376
Advertising
![background image](/manuals/570509/376/background.png)
• Upper limit of the beam NOT higher than 49-3/4 in.
(1263 mm) above ground at a distance of 25 ft. (7.5 m)
from the headlight.
Figure 5.149: Headlight Beam Positioning
A - 49.75 in. (1263 mm) Maximum B - 25 ft (7.5 m)
C - Top Edge of Beam
D - Beam Centered on Direction
E - Ground
of Travel Line
Replacing Headlight Bulb
1. Remove two screws (A) and remove headlight
assembly from hood.
Figure 5.150: Headlights
2. Pull wiring harness connector off the headlight
assembly and remove rubber insulator boot (A).
Figure 5.151: Headlight Assembly
169887
360
Revision A
Advertising