Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 104)

Publication 1757-IN510A-EN-P - October 2003
4-20 ProcessLogix Server Upgrade Procedures
4. To remove a program:
a. Click on the appropriate program in the list of installed
programs.
b. Click Add/Remove, Change/Remove or Remove.
c. Click Yes to confirm removal.
d. Repeat the steps for each installed component in the
following order.
IMPORTANT
Be sure to remove the components, if installed, in
the order they are listed below.
If at any time during software uninstall, a Remove
shared file prompt appears, click
Yes to all or
Remove all.
If necessary, click OK or Yes to confirm.
If you see an Uninstall successfully completed
message, or a message stating some elements were
not removed, click
OK.
If a delay occurs during uninstall, check the task bar
and call up the Remove Programs window.
Table 4.H Removing Selected R400.0 SP2 Components
✔
Order Component
1 . ProcessLogix SP2 Update
2. Engineering Tools R400 SP2 Option
3. Engineering Tools R400 SP2
4. ProcessLogix - R400 SP2
5. ProcessLogix Update
6. Control Component Library
7. PsAxCtl Document EXE (If you see Application Removal windows,
click OK)
8. Psc Engineering Tools
9. RSLinx
1 0. Knowledge Builder
1 1 . Microsoft SQL Server 7.0
1 2. PLX System Installer