Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 196)

Publication 1757-IN510A-EN-P - October 2003
7-12 Firmware Maintenance Procedures
Loading Application Image
1 . With the 1757-PLX52, TC-MUX021, or 1757-FIM module in its
ALIVE state, click the 1757-PLX52, TC-MUX021, or 1757-FIM
module in the Detail pane.
2. Click the firmware button to initiate the firmware update.
3. Click Yes to acknowledge the Warning prompt.
4. To load the application image to a 1757-PLX52, TC-MUX021, or
1757-FIM, locate the appropriate application file. See Table 7.D,
below.
This example illustrates loading the personality image to a
1757-PLX52 for CEE-50ms.
5. Select the appropriate file.
Table 7.D Application Image Reference for R510.0
Model Number Directory File
1757-PLX52
CEE-50ms C:\Honeywell\TPS50\system\bin cee50.pcm
1757-PLX52
CEE-5ms C:\Honeywell\TPS50\system\bin cee5.pcm
TC-MUX021 C:\Honeywell\TPS50\system\bin simrex.pcm
1757-FIM C:\Honeywell\TSP50\system\Firmware\1757-FIM Fimrex.pcm