Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 49)

Publication 1757-IN510A-EN-P - October 2003
Operating System Installation Procedures 2-29
Windows 2000 Service
Pack 4 Installation Checking for Windows 2000 Service Pack 4
Complete the following steps to determine whether the source CDs
included SP4. If you have a redundant Server pair, you must complete
this procedure on both
SERVERA and SERVERB.
1 . Logon to the system.
2. Click Star t ⇒ Run.
3. Enter >winver< and press <Enter>.
4. In the About Windows window, look to see if the following line
appears: Version 5.0 (Build 2195: Service Pack 4).
• If the line appears as shown, click OK and return to the
checklist that led you to this task.
• If the line does not say Service Pack 4, click OK and continue
with Installing Windows 2000 Service Pack 4 on page 2-30.
TIP
If this is the first time starting up since the Windows
2000 operating system install, it is necessary to
remove the default startup screens. Refer
to Removing the Default Startup Screens on
page P-4.