Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 146)

Publication 1757-IN510A-EN-P - October 2003
5-20 ProcessLogix Client Installation and Upgrade Procedures
Installing Knowledge Builder Components
1 . At the Knowledge Builder - Welcome window, click Nex t.
2. Click Yes to accept the license agreement.
3. Select the KB Full option and click Nex t.
For additional information on KB install types, refer to Installing
Knowledge Builder Components on page 8-5.
4. Click Select All and click Nex t.
5. At the Server selection window, click Nex t to accept the default
directory for Knowledge Builder.
6. At the Start Copy window, click Nex t.
7. At the Installation Completed window, click Finish.
The KB_update executes. No user interaction is required.
When the Knowledge Builder install is complete, the
ProcessLogix R510.0 Knowledge Builder CD ejects.
8. Insert the ProcessLogix R510.0 Application Software CD into the
CD-ROM drive and click Yes.
Installing Engineering Tools
This procedure is required for an Engineering Workstation only. If you
are installing an Operating Workstation, skip to Installing the
ProcessLogix Client Software on page 5-21.
1 . At the Ready to Install window, click Install.
ATTENTION
!
Do not click No in the next step.
Clicking No aborts the entire ProcessLogix
installation.
TIP
Command windows open during Engineering Tools
install. These windows close automatically.