Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 152)

Publication 1757-IN510A-EN-P - October 2003
5-26 ProcessLogix Client Installation and Upgrade Procedures
1 0. If necessary, enter >D< to specify that UpgradeData is a
directory.
1 1 . Delete the backup files from the remote PC.
Restoring ProcessLogix Data
The following items should be considered before you begin operating
your ProcessLogix Client.
Transferring ProcessLogix Data is complete.
Return to the checklist that led you to this task.
Finalizing ProcessLogix
Client Installation Changing Hosts File Entries
Complete the following steps to map computer names to respective
unique IP addresses.
1 . If necessary, logon as ps_user.
2. Use Notepad to view the Hosts file in the directory location:
Table 5.O Post-upgrade Considerations
Item Post-upgrade
Custom Displays If necessary, use Windows Explorer to create the
C:\Honeywell\client\abstract.
Copy backed up displays from the backup directory to
C:\Honeywell\client\abstract.
Custom displays may require modification for use in an
R510.0 system.
System Displays You must reapply the documented changes to the new system
displays after the upgrade.
Station Menus You must reapply the documented changes to the new Station
menus after the upgrade.
Localization You must reapply the settings after the upgrade.
Station configuration file You must reapply the changes to the new station.ini file after
the upgrade.
Station setup file The new default setup file, default.stn, is configured as
“static Station 1”. If this is not correct, you must make the
appropriate changes via Station’s Setup menu. See the
Configuration Guide for details.
Navigate in Knowledge Builder to Server and Client
Configuration Guide
⇒
Configuring Stations and Printers
⇒
Setting Up Station for more information.