Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 153
![background image](/manuals/579304/153/background.png)
Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Client Installation and Upgrade Procedures 5-27
C:\WINNT\SYSTEM32\DRIVERS\ETC.
3. You must enter the desired computer names and respective
unique IP addresses on a separate line for each Server as shown
in the display above.
These names and addresses must be included in the Hosts file
and resident on each Server and Client.
ATTENTION
!
You must identify all Server computer names and
respective unique IP addresses in the Hosts file and
be sure they are resident on each ProcessLogix
Client.
Use the DOS command >IPCONFIG/ALL<, or access
TCP/IP Properties through the General tab in the
Local Area Connection Properties dialog box to
obtain IP addresses for all configured components.
TIP
The Hosts file includes a default IP address of
>127.0.0.1< for a localhost. Do not delete this default
entry from the Hosts file.