Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 219)

Publication 1757-IN510A-EN-P - October 2003
Supplementary Procedures 8-17
Exporting the Engineering Repository Database
Complete these steps on a non-redundant Server or on SERVERB.
1 . Logon to the Server as ps_user.
2. Using Windows Explorer, create the folder C:\ExportDB.
3. Click Star t ⇒ Pr ograms ⇒ Pr ocessLogix Engineering Tools
⇒ Contr ol Builder.
4. In the Login dialog box, make these entries:
a. Enter >mngr< as the default User Name.
b. Enter the appropriate Password.
c. Enter the appropriate Server name in the Server Name field.
d. Select Classic Ser ver Secur ity in the Domain Name
drop-down list.
5. Click OK.
6. Click File ⇒ Export.
7. Click Br owse to set the Directory to export the data to
C:\ExportDB.
8. Click Select All.
Depending on the size of your database, this step may take
several minutes.
9. Click Ex por t.
Depending on the size of your database, this step may take
several minutes to several hours.
1 0. Close Control Builder.
IMPORTANT
Process systems must export their Engineering
Repository Database at this time before proceeding.
The data that is saved during this step can be stored
on the existing system, but can NOT be contained
within the C:\Honeywell path.
For example, create a directory at the root of C:
(e.g., C:\ExportDB).
If the system is clean (i.e., no configuration applied
yet), this procedure can be skipped.