Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 55)

Publication 1757-IN510A-EN-P - October 2003
Operating System Installation Procedures 2-35
Installing Internet Explorer 6.0 SP1
All systems are required to use Internet Explorer 6.0 SP1. Complete
the following steps to install Internet Explorer 6.0 SP1. If you have a
redundant Server pair, you must complete this procedure on both
SERVERA and SERVERB.
1 . If necessary, logon to the system.
2. Insert the ProcessLogix R510.0 Knowledge Builder CD into the
CD-ROM drive.
3. Click Star t ⇒ Run.
4. Enter this path or Br owse to:
>D: (or your CD-ROM drive letter) \IE6_SP1\IE6Setup.exe<
5. Click OK to launch the Internet Explorer setup application.
6. Select the I accept the agr eement option and click Nex t.
7. At the Windows Update: Internet Explorer window, click Nex t.
8. Click Finish.
The system automatically restarts.
Internet Explorer 6.0 SP1 Installation is complete.
Return to the checklist that led you to this task.
TIP
If this is the first time starting up since the Windows
2000 operating system install, it is necessary to
remove the default startup screens. Refer
to Removing the Default Startup Screens on
page P-4.
TIP
On subsequent logons to the computer, a task runs
to apply the update. You will see this one time for all
users of the computer.