Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 14)

Publication 1757-IN510A-EN-P - October 2003
Preface 4
Removing the Default
Startup Screens Throughout this document there are times when you need to remove
the default startup screens. Use the following Tip to complete the
task.
Rockwell Automation
Support Rockwell Automation provides technical information on the web to assist you
in using our products. At http://support.rockwellautomation.com, you can
find technical manuals, a knowledge base of FAQs, technical and application
notes, sample code and links to software service packs, and a MySupport
feature that you can customize to make the best use of these tools.
For an additional level of technical phone support for installation,
configuration and troubleshooting, we offer TechConnect Support programs.
For more information, contact your local distributor or Rockwell Automation
representative, or visit http://support.rockwellautomation.com.
New Product Satisfaction Return
Rockwell tests all of our products to ensure that they are fully operational
when shipped from the manufacturing facility. However, if your product is
not functioning and needs to be returned:
Your Questions or Comments about This Manual
If you find a problem or have a comment about this manual, please
notify us of it on the enclosed How Are We Doing Form, at the back
of this manual. This form is also available in Knowledge Builder.
TIP
If this is the first startup since the operating system
install, you must remove the default startup screens.
Professional Systems
1. On the Getting Started with Windows 2000 window, uncheck the
Show this screen at startup checkbox.
2. Click Exit.
Server Systems
1. On the Windows 2000 Configure your Server window, select the I
will configure this Server later option and click Next.
2. Uncheck the Show this screen at startup checkbox and close
the window.
United States Contact your distributor. You must provide a Customer Support case
number to your distributor in order to complete the return process.
Outside United
States Please contact your local Rockwell Automation representative for
return procedure.