Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 173
Publication 1757-IN510A-EN-P - October 2003
Additional Redundant Server Procedures 6-13
5. On the Connection tab, make these entries to have the Station
point to
SERVERB (PLX1 B):
a. In the Server field, enter or
Br ow se to the Secondary Server
name,
SERVERB.
b. Select the Station type as
Static Station.
c. Enter >1< as the Static Station Number and click
Advanced.
d. Check the
Aux iliar y setup file checkbox.
e. Click
Br owse and navigate to:
C:\Honeywell\Client\Station\default.stn and click
Open.
6. On the Displays tab, check the Sear ch subdir ector ies for
shapes checkbox.
7. Edit the Search for displays in list so that it includes the
following directories
only:
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract
• C:\honeywell\client\dspbld
a. To delete a directory, select it and click
Remove.
IMPORTANT
You must indicate the full path to the .stn file.