Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 73)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-11
• If you need to make changes, click Back to access any
previous entries.
• If the details are okay, click Next to begin the Server setup.
This may take 10 to 15 minutes to complete.
• If a Sentinel Pro Driver Setup Error window appears, click
OK.
21 . If necessary, click OK at the Failed to uninstall Quick Builder
setup error.
22. If the system includes Excel Data Exchange, click Enable
Macr os when prompted. Otherwise, continue to the next step.
23. At the Setup Complete window, select the No, I will r estar t my
computer later option and click Finish.
Wait until the command windows have closed and file copying
is complete. This may take a few minutes to complete.
24. At the ProcessLogix Setup Complete window, select the No, I
will r estar t my computer later option and click Finish.
TIP
If a Read Only File Detected window opens, select
Don’t display this window again and click Yes to
overwrite old files.
TIP
If a Microsoft Excel window opens, check the Do
not show this dialog again checkbox and click
OK.
ATTENTION
! The CD must remain in the CD-ROM drive. You must
select
No in Step 23.