Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 67)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-5
2. When the following dialog opens, click OK to restart the PC.
A System Shutdown warning opens and closes. After the restart,
installation automatically continues.
Normally, no actions are necessary on your part. Do not press
any keys, buttons, etc. during shutdown and restart. However, if
the system displays the logon window for more than about ten
(10) seconds, logon as ps_user.
3. SQL Service Pack 2 installation automatically starts.
Status messages indicate progress, but no user interaction is
required. This takes 2 to 6 minutes to complete.
When the SQL install is complete, the ProcessLogix R510.0 Base
Software CD ejects.
TIP
Upon restarting the system, you may receive:
• a message that a service failed to start. If you
receive this message, click OK.
• an notcli.exe – Unable to Locate DLL prompt.
This is normal at this stage and can be ignored.
Click
OK to close the prompt.
ProcessLogix installation resumes automatically. It is
possible for ProcessLogix installation to be delayed
for several minutes before resuming.
TIP
If a Q323875 window opens, click Yes to all to
overwrite old files.