Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 216)

Publication 1757-IN510A-EN-P - October 2003
8-14 Supplementary Procedures
Installing and Running
NetShield with
ProcessLogix
Background
Problems with starting up and synchronizing Servers and crashing of
NetShield components can result from running the components
concurrently with the ProcessLogix software unless NetShield is
specifically installed and run as described in this section.
The problems noted above have occurred with version 4.5 of Network
Associates (formerly known as McAfee) NetShield, when running
automatically upon startup or during file access.
If the NetShield program is already installed on your ProcessLogix
Server, go to the next section to remove it. Otherwise, go to the
section entitled Installing NetShield and configuring directories for
scan exclusion.
Removing Existing NetShield Installation
If NetShield is currently installed on the ProcessLogix Server, complete
the following steps to remove it.
1 . Click Star t ⇒ Settings ⇒ Contr ol Panel.
2. Double-click Add/Remove Pr ogr ams.
3. Select NetShield and click Remove.
4. Click Yes to confirm the action and follow the on-screen
instructions on the Uninstall Wizard to remove the NetShield
program.
5. Click Yes to restart the PC if prompted.
The PC must be restarted before continuing with the next
section.
IMPORTANT
If you need to run the Network Associates NetShield
4.5 for NT and 2000 application on a ProcessLogix
Server, you must install and run the application as
described in this section.