Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 117)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-33
1 5. Enter this path location in the Copy manufacturer’s file from
field or Br owse to:
>D: (or your CD-ROM drive letter) \RSLinx\RSLinx\
PlugNPlay\Win2K\1784-PCIC(S)\abpcic.inf<
1 6. Click OK.
1 7. Click Nex t to install the driver.
1 8. If a Digital Signature Not Found window opens, click Yes.
1 9. If necessary, click Yes to overwrite the VirtualBackplane.sys file.
20. If necessary, click Yes to overwrite the ABPCICSW.sys file.
21 . Click Finish.
Transfer of the 1784-PCIC Card to the R510.0 System is complete.
Return to the checklist that led you to this task.
Copying R400.0 SP2 or
R500.1 Data to the R510.0
Server Reconnect Redundant Servers
If you have a redundant Server pair, both SERVERA and SERVERB
should have been upgraded to ProcessLogix R510.0.
1 . Shutdown both servers.
2. Reconnect the Ethernet network cable(s).
3. Restart SERVERA.
4. On SERVERA, right-click in the taskbar to open the popup
menu and click Task Manager to call up the Windows Task
Manager dialog box.
5. Click the Performance tab.
6. Monitor the CPU Usage until the value displayed goes below the
90 to 100% threshold.
Wait until the RSLinx icon appears in the taskbar. This assures
proper startup time of ProcessLogix services on
SERVERA
before restarting SERVERB.
7. Click File ⇒ Exit Task Manager.