Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 156)

Publication 1757-IN510A-EN-P - October 2003
5-30 ProcessLogix Client Installation and Upgrade Procedures
2. On the Client, click Star t ⇒ Pr ograms ⇒ Pr ocessLogix Client
Softwar e ⇒ Station.
3. Click Cancel at the Unable to connect prompt, if applicable.
4. Click Station ⇒ Connect to call up the Station Connect dialog
box.
5. Select Default and click Edit Connection.
6. On the Connection tab:
a. Enter the name or IP address of the non-redundant Server
( PLX1 ) in the Server field.
PLX1 is the factory default Server name. It is used for
example purposes only.
b. Select the appropriate station type, Static Station or Rotary
Station.
c. Click Advanced.
d. Enter the appropriate Static Station Number or enter the
appropriate update rates and startup display number for
Rotary.
7. On the Displays tab, check the Sear ch subdir ector ies for
shapes checkbox.
8. Edit the Search for displays in list so that it includes the
following directories only:
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract
• C:\honeywell\client\dspbld
a. To delete a directory, select it and click Remove.
b. To add a directory, click Add, click , select the directory,
and click OK.
9. Click Save.
1 0. Click Yes to save changes.
1 1 . Click Connect.
TIP
Display Sear ch Path Optimization
You can improve Station’s performance by
unchecking the Search subdirectories for shapes
checkbox in the Connection Properties dialog box,
and then explicitly defining each subdirectory that
contains displays.