Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 25)

Publication 1757-IN510A-EN-P - October 2003
Operating System Installation Procedures 2-5
6. Continue with Completing the Windows 2000 Server Installation
on page 2-5.
Starting the Windows 2000 Server Installation from the CD-ROM
1 . Turn on the PC.
2. Insert the Microsoft Windows 2000 Server CD into the CD-ROM
drive.
3. When prompted, enter into the computer’s BIOS setup program.
4. Verify that the Boot Priority has the CD-ROM device listed first.
(Before the floppy or hard disk devices.)
5. Exit the BIOS and save the setting.
6. If prompted, press any key to boot from the CD-ROM.
7. Press <Enter> at the Welcome to Setup window.
Completing the Windows 2000 Server Installation
1 . If requested, insert the Windows 2000 Server CD into the
CD-ROM drive and press <Enter>.
2. Press <F8> to agree to the Windows 2000 Licensing Agreement.
IMPORTANT
If your installation requires additional
Manufacturer’s Drivers, press <F6> during the boot
process and follow the on-screen instructions for
adding the necessary drivers.