Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 223)

Publication 1757-IN510A-EN-P - October 2003
Supplementary Procedures 8-21
• ODBC Client
• OPC Server Connect
• Network API
• Shape Library
4. Select Pr ocessLogix - Remove this last.
5. Click Change/Remove.
6. Click Yes to confirm.
7. Click OK when completed.
8. Close the Add/Remove Programs window.
Changing the PC Name
Complete the following steps to change the name of your PC.
1 . If necessary, click Star t ⇒ Settings ⇒ Contr ol Panel.
2. Double-click System.
3. On the Network Identification tab, click Pr oper ties.
4. Enter the desired computer name in the Computer name entry
field.
IMPORTANT
PC Naming Rules
The base name cannot contain more than 13
alphanumeric characters and must contain no spaces.
The full computer name cannot contain more than
14 alphanumeric characters. The following naming
conventions are required for given ProcessLogix
system architectures.
For non-redundant Server, be sure the name does
not end in the letter “A” or “B”. The default name is
PLX1.
For redundant Servers, append the letter A or B to
the base name to identify the PC’s function in the
system architecture for the primary and secondary
Servers, respectively. For example, use the name
PLX1A for the primary Server (
SERVERA) and PLX1B
for the secondary Server ( SERVERB) (14 characters
total: up to 13 base plus A or B).