Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 107)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-23
Preparing for a
ProcessLogix R320.0 to
R510.0 Server Upgrade
Backing Up a ProcessLogix R320.0 Server to Tape
A complete system backup should be performed before proceeding
with the procedures in this section. This should include the
Engineering Database, ProcessLogix Server Database, Windows
Registry, and all files on the system.
Refer to Backup up a ProcessLogix Server to Tape on page 1-6 of the
R320.0 Installation and Upgrade Guide to back up your current
ProcessLogix R320.0 Server data to tape.
ATTENTION
!
All procedures in this section should be performed
with the system(s) Off-Process. Be certain that your
process is off control before you begin any upgrade
procedure. This means the 1757-PLX52 should be in
the Idle state.
All work performed in this section occurs on the
existing ProcessLogix R320.0 Server(s).
If operating a redundant server pair, be sure that
unless otherwise indicated in the upgrade procedure
SERVERA is primary, SERVERB is backup, and the
servers are synchronized.