4 - processlogix server upgrade procedures, Processlogix server upgrade scenarios, Upgrade r500.1 server to r510.0 – Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 85: Chapter 4, Processlogix server upgrade procedures, Processlogix server upgrade scenarios -1, Upgrade r500.1 server to r510.0 -1, Chapter
1
Publication 1757-IN510A-EN-P - October 2003
Chapter
4
ProcessLogix Server Upgrade Procedures
The supported ProcessLogix server upgrade scenarios are:
• Upgrade from R500.1 - clean install
• Upgrade from R500.1
• Upgrade from R400.0 SP2 - clean install
• Upgrade from R400.0 SP2
• Upgrade from R320.0 - requires clean install on new hardware
ProcessLogix Server
Upgrade Scenarios
Upgrade R500.1 Server to R510.0
This section describes the steps necessary to upgrade the
ProcessLogix R500.1 Server software to R510.0. There are two upgrade
options.
Option 1: Upgrading R500.1 Server to R510.0 - Clean Install
a. Backup your data.
b. Install a clean Windows 2000 Server operating system.
c. Install ProcessLogix R510.0.
d. Restore your data.
The following table lists the items in Option 1 that you
MUST
complete to upgrade an R500.1 Server to an R510.0 Server.
IMPORTANT
Due to the nature of this upgrade, it is strongly
recommended that you follow Option 1 when
upgrading from R500.1 Server to R510.0.
Table 4.A Option 1: Upgrading R500.1 Server to R510.0 Checklist
✔
Step
Item
Page
1 .
Preparing for a ProcessLogix R400.0 SP2 or R500.1 to R510.0
Server Upgrade
2.
Saving R400.0 SP2 or R500.1 Data to a Remote PC
3.
Clean System Windows 2000 Server Installation
4.
Windows 2000 Service Pack 4 Installation
5.
Windows Security Hotfix Installation
6.
Internet Explorer 6.0 SP1 Installation
7.