Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 244)

Publication 1757-IN510A-EN-P - October 2003
11-4 Performance and Capacity Specifications
Application Usage
Server configuration memory allocations assume Server services only.
Client memory usage already includes the ProcessLogix Client
Applications. However, most applications can be run on either the
Servers or Station Clients. On minimum to typical systems, these
applications may be run on the Server Platforms. On performance
systems, the Servers should be dedicated to running only the Server
Services. On these systems, when possible, all applications should be
run from the Client stations.
Using the Platform Requirements Tables 11.B and 11.C as a base for
memory usage, add on the memory requirements for each of the
applications from the Application RAM Usage. Table 11.C is intended
to be used on a regular basis.
(1)
TIP
Failure to add additional memory may result in
degradation of system performance.
Table 11.C Application RAM Usage
Application RAM Usage
Windows 2000 Applications
Explorer 8 MB
Computer Management
(1) 8 MB
Event Viewer 5 MB
Task Manager
(1) 2.5 MB
Internet Explorer 8 MB
Backup 6 MB
ProcessLogix Applications
Station
(2) 5 MB
Control Builder 20 MB
Fieldbus Library Manager 15MB
Network Tools
(3) 3 MB
Quick Builder (3) 20 MB
DB Admin (3) 10 MB
Import Export Tool (3) 20 MB
Knowledge Builder Adds 2 MB on top of Internet Explorer
Fieldbus: NIFB
(4) 8 MB
Fieldbus: NI FBUS Configurator
(5) 13 MB
Other Applications