Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 56)

Publication 1757-IN510A-EN-P - October 2003
2-36 Operating System Installation Procedures
Updating Windows
Installer All Windows 2000 systems are required to install the Windows
Installer update. Complete the following steps to install the Windows
Installer update. If you have a redundant Server pair, you must
complete this procedure on both
SERVERA and SERVERB.
1 . If necessary, logon to the system.
2. Insert the ProcessLogix R510.0 Base CD in the CD-ROM drive.
3. Click Star t ⇒ Run.
4. Enter this path or Br ow se to:
>D: (or your CD-ROM drive letter) \Process Product\instmsiw.exe<
5. Click OK.
6. If a Specified service already exists error appears, Windows
Installer is already up to date, click OK and return to the
checklist that led you to this task. Otherwise, click OK at the
Windows Installer Setup completed successfully dialog box.
7. Click No (Do not restart the system at this time.).
8. Wait for installation operations to complete.
9. Close all applications.
1 0. Restart the PC.
Updating Windows Installer is complete.
Return to the checklist that led you to this task.
IMPORTANT
If using Windows XP Professional, do not complete
this update as Windows XP Professional has the most
recent update for the Windows Installer.
TIP
If this is the first time starting up since the Windows
2000 operating system install, it is necessary to
remove the default startup screens. Refer
to Removing the Default Startup Screens on
page P-4.