Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 42)

Publication 1757-IN510A-EN-P - October 2003
2-22 Operating System Installation Procedures
1 4. Select the Custom settings option and click Nex t.
1 5. At the Networking Components window, select Inter net
Pr otocol (TCP/IP) and click Pr oper ties.
1 6. In the Internet Protocol (TCP/IP) Properties window:
a. Select the Use the follow ing IP addr ess option.
b. Enter the appropriate IP address information.
The following Private Networking IP Address scheme can be
utilized for the system to operate:
c. Enter the Subnet Mask >255.255.255.0<.
d. Enter a default gateway if necessary.
e. Click OK to return to the Networking Components window.
TIP
If setup has not found a suitable Network Device,
you are prompted for installing one. Follow the
instructions for adding a manufacturer supplied
driver or add the Microsoft Loop Back adapter.
Table 2.D Private Networking IP Address scheme
PC Type Suggested Private Networking IP Address
Client NIC 1: 192.168.0.x
NIC 2: 192.168.1.x
where x is the Station number +2 (for Station number 2, x=4)