Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 75)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-13
1 6. Logon as ps_user.
1 7. Click Star t ⇒ Run.
1 8. Enter this path or Br owse to:
>D:
(or your CD-ROM drive letter) \Update\setup.exe<
1 9. Click OK to launch the software setup application.
20. Click Nex t to install the ProcessLogix Update.
21 . At the ProcessLogix Update Complete window, click Finish.
22. If prompted to reboot, click No.
ATTENTION
!
Non-r edundant Ser ver
If you are installing ProcessLogix software on a
non-redundant Server:
1 . Restart the Server.
2. Logon as ps_user.
Return to the checklist that led you to this task.
ATTENTION
!
Redundant Ser ver Pair
If you are installing ProcessLogix software on a
redundant Server pair:
1 . Do not restart SERVERA.
2. Return to the beginning of ProcessLogix Software
Installation on a Clean PC on page 3-1 and repeat
for
SERVERB.
3. Once you have completed these procedures for
both SERVERA and SERVERB, restart SERVERB.
4. Logon to SERVERB as ps_user.
5. When SERVERB is running, restart SERVERA and
logon as ps_user.
Return to the checklist that led you to this task.