Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 115)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-31
3. If you have a non-redundant server:
a. Enter >xcopy C:\Data\*.* T:\R320Data\ /E<
and press <Enter>.
b. If necessary, enter >D< to specify that R320Data is a directory.
c. Wait until the C:\ prompt appears and close the DOS
window.
4. If you have a redundant server pair:
a. On SERVERA, enter
>xcopy C:\Data\*.* T:\R320PrimaryData\ /E<
and press <Enter>.
b. If necessary, enter >D< to specify that R320PrimaryData is a
directory.
c. Wait until the C:\ prompt appears and close the DOS
window.
d. On SERVERB, enter
>xcopy C:\Data\*.* T:\R320BackupData\ /E<
and press <Enter>.
e. If necessary, enter >D< to specify that R320BackupData is a
directory.
f. Wait until the C:\ prompt appears and close the DOS
window.
Copying R320.0 Data to the R510.0 Server is complete.
Return to the checklist that led you to this task.