Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 211)

Publication 1757-IN510A-EN-P - October 2003
Supplementary Procedures 8-9
• The List pane provides information about the communication
status of the Supervisory Network.
• The Detail pane provides a graphical representation of the
modules included in the chassis.
• Each module graphic provides these details about the module:
– base catalog number (without the 1756- prefix)
– current state
– CEE type for 1757-PLX52s (standard is 50ms and fast is 5ms)
– current firmware version including application (AV) and boot
versions (BV), if applicable.
Usage guidelines
Observe the following usage guidelines to avoid a possible negative
impact on network performance under abnormal network conditions.
• Do not use Network Tools while connecting nodes to the
network.
• Do not use Network Tools when monitoring an analog I/O
module through Control Builder.
• Do not use Network Tools to monitor an analog I/O ControlNet
network while the system is “on-control”.
Online help
You can get online help by clicking Help ⇒ Help Topics and
displaying the desired topic.