Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 17)

1 Publication 1757-IN510A-EN-P - October 2003
Chapter
1
ProcessLogix R510.0 Installation Introduction
Operating System Support The following table shows the supported operating systems for
ProcessLogix.
Windows NT 4.0 Server and Workstation are not supported.
Operating System Options The hardware platform and all devices contained within it designated
for running the ProcessLogix R510.0 Software should be evaluated for
compatibility with the Windows 2000 operating system.
Systems designated to run ProcessLogix R510.0 Server software should
be Server Class and certified to run the Windows 2000 Server
Operating System. Refer to Minimum Hardware Requirements on
page Preface-2.
Systems designated to run ProcessLogix R510.0 Client Software should
be Workstation/Desktop Class and certified to run the Windows 2000
Professional Operating System.
To check to see which certifications your computer and hardware
components have, consult the Microsoft Hardware Compatibility List
at:
http://www.microsoft.com/windows2000/server/howtobuy/upgrading/
compat/default.asp
Review the scenarios below for your current operating system
installation and upgrade options.
Table 1.A ProcessLogix Component Configuration Table
ProcessLogix R510.0 Windows 2000 Windows XP
Professional
Server Professional
Server
✔
Client ✔ (1)
(1) Windows 2000 Server is not recommended as a Client for ProcessLogix R510.0 due to the
default standard hardware and operating system requirements.
✔ ✔