Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 209)

Publication 1757-IN510A-EN-P - October 2003
Supplementary Procedures 8-7
SQL Server SQL Server is automatically installed during the ProcessLogix R510.0
installation.
SQL Status
Follow these steps to check if SQL Server is running and to start it if
necessary.
1 . Right-click the My Computer icon and select Manage.
2. Expand Services and Applications.
3. Select Ser vices.
4. Scroll down to the service MSSQLSERVER and verify that it has
started.
If the MSSQLSERVER service did not start, start it.
5. Scroll down to the service SQLSERVERAGENT and verify that it
has started.
If the SQLSERVERAGENT service did not start, start it.
6. Close the Computer Management window.
Cancelling a Software
Component Installation If a problem occurs during the installation routine, complete the
following steps to cancel the installation of a component.
1 . Press F3 to open the Exit Setup window.
2. Click Ex it Setup.
3. Try to install the given component or all components again.
If you are still experiencing problems, Refer to Rockwell
Automation Support in the Preface for information on how to
contact us.