Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 18)

Publication 1757-IN510A-EN-P - October 2003
1-2 ProcessLogix R510.0 Installation Introduction
ProcessLogix Server
Supported Installations
IMPORTANT
If you purchased a new ProcessLogix R510.0 Server
from Rockwell Automation, the operating system and
ProcessLogix software have already been installed.
Do not r einstall the softw ar e. Refer to the
ProcessLogix R510.0 Server Installation Instructions,
publication 1757-IN950 shipped with your hardware.
It is strongly recommended that you name your
Server properly prior to installing ProcessLogix
R510.0 software.
To change the Server name prior to installing
ProcessLogix R510.0, follow the procedures in
Changing the Computer Name on a ProcessLogix
Client on page 8-23.
Once the ProcessLogix R500.0 software is installed,
changing the computer name requires a full uninstall
and reinstall of all the ProcessLogix R510.0 software.
Refer to Changing the Computer Name on a
ProcessLogix Server on page 8-16.
IMPORTANT
A 1784-PCIC or Ethernet card must already be
installed in the ProcessLogix Server(s).