Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 206)

Publication 1757-IN510A-EN-P - October 2003
8-4 Supplementary Procedures
Removing R500.1 Knowledge Builder
1 . Click Star t ⇒ Settings ⇒ Contr ol Panel.
2. Double-click Add/Remove Pr ogr ams.
3. To remove a program:
a. Click on the appropriate program in the list of installed
programs.
b. Click Add/Remove, Change/Remove or Remove.
c. Click Yes to confirm removal.
d. Repeat the steps for each installed component in the
following order.
Installing Knowledge Builder
1 . Insert the ProcessLogix R510.0 Knowledge Builder CD into the
CD-ROM drive.
2. Enter this path or Br ow se to:
>D: (or your CD-ROM drive letter) \Knowledge_Builder\Setup.exe<
3. Click OK to launch the Knowledge Builder setup.
IMPORTANT
Be sure to remove the components, if installed, in
the order they are listed below.
If at any time during software uninstall, a Remove
shared file prompt appears, click
Yes to all or
Remove all.
If necessary, click OK or Yes to confirm.
Table 8.C Removing R500.1 Knowledge Builder Components
✔
Step Item
1. KB Server - Knowledge Builder Tools 4
2. KBServer - ProcessLogix R500
3. KB Client
4. Knowledge Builder (At the maintenance window, click Remove and
Next.