Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 77)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Installation Procedures 3-15
3. Verify the application title in the title bar.
• If the title is RSLinx Lite, close RSLinx and continue with
Installing the Activation File, below.
• If the title is RSLinx OEM you already have the OEM version
installed and you do not have to install the activation file.
Close RSLinx, and return to the checklist that led you to this
task.
Installing the Activation File
1 . Locate the RSLinx Master Disk and insert it into the floppy drive.
2. Click Star t ⇒ Run.
3. Enter this path or Br owse to:
>A: (or your floppy drive letter) \EVMOVE.EXE<
4. Click OK to launch the move executive.
5. Verify that you are Moving Activations From Drive A:
(or your
floppy drive letter) To Drive C: (or your hard drive letter) .
6. Click OK to initiate the move.
7. Click Move to move the file to the hard drive.
8. Wait for a dialog box to indicate a successful move, and click
OK.