Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 138)

Publication 1757-IN510A-EN-P - October 2003
5-12 ProcessLogix Client Installation and Upgrade Procedures
Upgrade R320.0 Windows NT 4.0 Client to R510.0 Windows XP
Professional Client (Clean Install)
The following table lists the items that you MUST complete to
upgrade an R320.0 Windows NT 4.0 Client to an R510.0 Windows XP
Professional Client.
IMPORTANT
Due to significant changes in the ProcessLogix
software, operating system, and performance
requirements, migration from a ProcessLogix R320.0
Client to a ProcessLogix R510.0 Client requires that
you backup your R320.0 data and then complete a
clean ProcessLogix R510.0 Client installation. Refer to
Table 11.B to confirm that your PC meets the
platform requirements for a ProcessLogix R510.0
Client.
Table 5.K Upgrade R320.0 Windows NT 4.0 Client to R510.0 Windows XP
Professional Client (Clean Install) Checklist
✔
Step Task to Complete: Refer to:
1 . Saving Important Data 5-13
2. Networking an Existing Client to a Remote PC 5-14
3. Clean System Windows XP Professional Installation 2-18
4. Creating the ProcessLogix User Accounts 2-26
5. Modifying Windows XP 2-28
6. Windows Security Hotfix Installation 2-31
7. Internet Explorer 6.0 SP1 Installation 2-33
8. Updating ISScript 2-37
9. Additional Operating System Customization Procedures 2-38
1 0. Creating Emergency Repair Disks 2-40
1 1 . Installing ProcessLogix R510.0 Client Software 5-18
1 2. Transferring ProcessLogix Data 5-25
1 3. Finalizing ProcessLogix Client Installation 5-26