Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 186)

Publication 1757-IN510A-EN-P - October 2003
7-2 Firmware Maintenance Procedures
1 3. Enter this path location in the Copy manufacturer’s file from
field or Br owse to:
>D:
(or your CD-ROM drive letter) \RSLinx\RSLinx\PnP_Drivers\
Win2K\1784-PCIC(S)\abvbp2k.inf<
1 4. Click OK.
1 5. Click Nex t to install the driver.
1 6. If a Digital Signature Not Found window opens, click Yes.
1 7. If necessary, click Yes to overwrite the VirtualBackplane.sys file.
1 8. If necessary, click Yes to overwrite the ABPCICSW.sys file.
1 9. Click Finish.
20. Click Close.
Verify the 1784-PCIC Driver Version
1 . If necessary, right-click the My Computer icon and select
Manage.
2. If necessary, select Device Manager.
3. If the A-B Virtual Backplane icon exists, expand A-B Virtual
Backplane.
4. Double-click A-B 1784-PCIC(S).
5. If AB 1784-PCIC(S) is not present, you need to install the
Hardware Device Drivers. Restart the PC and refer to Install
Hardware Device Drivers on page 7-1.
6. On the Driver Tab click Dr iver Details.
7. Select ABPCICW.sys.
The ABPCICSW.sys file version should be 3.6.18 WDM.
8. Select Vir tual Backplane.sys.
The VirtualBackplane.sys file version should be 1.9.
9. Click OK to close the Driver File Details window.
1 0. Click OK to close the AB 1784-PCIC(S) Properties window.