Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 63)

1 Publication 1757-IN510A-EN-P - October 2003
Chapter
3
ProcessLogix Server Installation Procedures
ProcessLogix Software
Installation on a Clean PC Rockwell Automation delivers the ProcessLogix Server with all the
required software pre-installed. The following instructions can be
used if the system has to be reinstalled or for new installations on a
PC that was not purchased from Rockwell Automation.
The following table lists the items that you MUST complete to install
the ProcessLogix software. If you are installing ProcessLogix software
on a redundant Server pair you must complete the items on
SERVERA
then repeat the same items on SERVERB.
IMPORTANT
If you purchased a new ProcessLogix R510.0 Server
from Rockwell Automation, the operating system and
ProcessLogix software have already been installed.
Do not r einstall the softwar e. Refer to the
ProcessLogix R510.0 Server Installation Instructions,
publication 1757-IN951 shipped with your hardware.
Table 3.A ProcessLogix Software Installation on a Clean PC
✔
Step Item Page
1 . Clean System Windows 2000 Server Installation 2-2
2. Creating the ProcessLogix User Accounts 2-26
3. Windows 2000 Service Pack 4 Installation 2-29
4. Windows Security Hotfix Installation 2-31
5. Internet Explorer 6.0 SP1 Installation 2-33
6. Updating Windows Installer 2-36
7. Updating ISScript 2-37
8. Additional Operating System Customization Procedures 2-38
9. Creating Emergency Repair Disks 2-40
1 0. 1784-PCIC Driver Installation 7-1
1 1 . Installing ProcessLogix R510.0 Software 3-2
1 2. Moving the RSLinx Activation File 3-14