Creating an emergency repair disk – Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 183

Publication 1757-IN510A-EN-P - October 2003
Additional Redundant Server Procedures 6-23
3. Click OK.
Backing Up a ProcessLogix Server Hard Drive to Tape
Performing backups is an essential part of maintaining your system.
You should back up all the files under the data directory, as well as
any user files you create. Refer to Backing Up a ProcessLogix Server
Hard Drive to Tape on page 6-23.
Creating an Emergency Repair Disk
After all installations and drivers are installed, you should now create
your Emergency Repair Disk. Use the following procedure to create
an emergency repair disk for your Windows 2000 Server installation.
1 . Insert a blank diskette into the floppy drive.
2. Click Star t
⇒ Pr ograms ⇒ Accessories ⇒ System Tools ⇒
Backup.
3. Click Emergency Repair Disk.
An Emergency Repair Diskette window opens.
4. Check the Also back up the r egistr y to the r epair dir ector y
checkbox and click
OK.
5. When finished, click OK.
6. Repeat Steps 1 through 5 with another blank formatted diskette.
7. Click Job
⇒ Exit.
8. Store the two diskettes in different places to protect against
damage to the diskettes.