Rockwell Automation 1771-QDC PLASTIC MOLD.MODULE - Manual (Page 171)

2–105 Command Word/Bit Descriptions
Publication 1771-6.5.88 – July 1997
TCC
Expert Response Compensation (ERC) Percentage
Word Description
TCC05 Minimum Velocity Control ERC Percentage [31]
Although error coding allows range of 00000 to 09999, the module limits it to a minimum of 01000.
TCC06 Minimum Pressure Control ERC Percentage [31]
Although error coding allows range of 00000 to 09999, the module limits it to a minimum of 01000.
TCC07 Open
Watchdog Timer
Word Description
TCC08 Profile Watchdog Timer Preset [21] When the module starts the Third Clamp Close Profile, it:
S starts an internal Profile Watchdog timer
S stops this timer and resets its accumulated value to zero (after reporting total execution time in CPS59) when it completes the
profile
S sets master status bit SYS04-B02 when the accumulated value of this timer equals or exceeds this entry
A zero entry inhibits SYS04-B02.
Unselected Valve Set-output Values
When the module starts the Third Clamp Close Profile, it:
•
sets its unselected outputs to the values listed below
•
ignores the unselected value of the selected output
•
uses ramp rates TCC17 - TCC32 to ramp unselected outputs
Word Description
TCC09 Output #1 Set-output Value during Profile [19]
TCC10 Output #2 Set-output Value during Profile [19]
TCC11 Output #3 Set-output Value during Profile [19]
TCC12 Output #4 Set-output Value during Profile [19]
TCC13 Output #5 Set-output Value during Profile [19]
TCC14 Output #6 Set-output Value during Profile [19]
TCC15 Output #7 Set-output Value during Profile [19]
TCC16 Output #8 Set-output Value during Profile [19]
Output Ramp Rates
The module uses the following ramp rates when moving its outputs
from setpoint to setpoint during the Third Clamp Close Profile. The
module interprets a ramp rate entry of zero as a step function ramp
(ramp disable).
Word Description
TCC17 Output #1 Acceleration Ramp Rate during Profile [20]
TCC18 Output #2 Acceleration Ramp Rate during Profile [20]
TCC19 Output #3 Acceleration Ramp Rate during Profile [20]
TCC20 Output #4 Acceleration Ramp Rate during Profile [20]
TCC21 Output #5 Acceleration Ramp Rate during Profile [20]
TCC22 Output #6 Acceleration Ramp Rate during Profile [20]
TCC23 Output #7 Acceleration Ramp Rate during Profile [20]
TCC24 Output #8 Acceleration Ramp Rate during Profile [20]