NewTek TriCaster 300 - Manual (Page 124)

Page | 108

When Tabs Follow Preview for Virtual Inputs is checked, the tab shown updates only
when you select a Virtual Input on Preview.
Hint: Control surface operations can sometimes result in a tabbed module that you want to view
being obscured because related Desktop Options are enabled. Press the corresponding control
surface Delegate button again to re-display the tabbed pane you are interest in.
6.4.2 DUAL DISPLAYS AND MONITORING
Figure 102
The Live Desktop monitor tabs and specific Multiview options can be flexibly combined to show
what you want to see, where you want to see it.
Note: These options are suitable when Multiview output is not tasked to projection or similar
display duties.
For example:

You might select the External layout for the Multiview output. Then select the Internal
Monitors tab on the Live Desktop – or reverse these choices. You’ll get much larger
views of all sources this way.

Alternatively, choose the All Monitors tab as the Multiview layout and drag the
horizontal divider between the monitors and the Switcher to of the top of the screen,
hiding the Desktop monitors.