NewTek TriCaster 300 - Manual (Page 133)

Page | 117

For each format option, the appropriate Connection Type options are also shown.
Let’s try to clarify all of this by considering an example. For an NTSC 1080i session, you can select
any of the following output connection and format combinations:

480i, 16:9 (SDI, Component) 480i, 16:9 (SDI,
Y/C + Composite)

480i, 4:3 (SDI, Component)

480i, 4:3 (SDI, Y/C + Composite)
MULTIVIEW OUTPUT
TriCaster’s Multiview output fills several valuable purposes. You might use it to provide a video
stream to a projection or other remote display system at high resolution. If you supply your
projector inputs from TriCaster’s SDI or analog video outputs instead, or don’t require projection,
the Multiview output can be used to feed a secondary display monitor.
Figure 113
Perhaps you wish to use Multiview to output something other than the main Program output.
This is where the Screen Layout menu comes in.
Hint: See Section 5.3.1 for details on the time shown in Multiview layouts with clocks.
Changing Multiview output options (Layout or Resolution) can cause frames to be dropped
briefly. Changing these settings during live production is not recommended.