NewTek TriCaster 300 - Manual (Page 75)

Page | 59
2. The Record Configuration panel opens (Figure 53).
3. Click in the Base Name field, and enter a unique name for the captured file(s).
Hint: TriCaster™ stores recordings at (drivename):\Media\Clips\sessionname\Capture (where
“drivename” and “sessionname” are appropriate entries for your system and session).
Figure 53
The default Encoding options and Destination will work just fine for our current purposes, so let’s
continue:
4. If necessary, select PGM as the Source to be recorded.
5. You could optionally enable the Add to DDR Playlist switch to automatically add newly
recorded clips to the DDR playlist – but let’s not do that yet.
6. Click Close.
7. Make sure you have an active source playing on Program output.
8. Press the Record button (Figure 52) – it will illuminate, and the neighboring timecode
field will begin keeping track of the duration of your recording.
9. After a little while, press Record again to stop recording.