Basic settings, Add to ddr, Audio headroom – NewTek TriCaster 300 User Manual
Page 244
Page | 228
BASIC SETTINGS
Figure 212
The first thing you may want to do is enter a Base Name for captured files. The name you enter
will be numerically incremented as necessary when you start and stop recording.
ADD TO DDR
Figure 213
Enable the Add to DDR Playlist switch to automatically include newly captured clips from the
designated (primary) source to the end of the DDR. These clips are available for immediate
playback during your live production.
AUDIO HEADROOM
In digital audio systems, signal levels exceeding allowable values are clipped (uniformly assigned
the maximum value), inevitably entailing audible issues. TriCaster’s Record Configuration panel
provides an Audio Headroom setting that provides the ability to set difference in decibels
between 0dB FS (the maximum allowable digital level) and the benchmark ‘alignment level’.