H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 156)

21-10
Figure 21-13 VLAN configuration page
Figure 21-14 Modify a VLAN
Make the following configurations on the page shown in Figure 21-14 :
Find GigabitEthernet1/0/1 in the port list.
Select the Untagged Member option for the port.
Click Apply to end the operation.
# Configure GigabitEthernet 1/0/1 as a tagged member of VLAN 2, and VLAN 6 through VLAN 50.
Select Network > VLAN in the navigation tree and then select the Port tab to enter the page shown
in Figure 21-15 .
Find GigabitEthernet1/0/1 in the port list, and click the corresponding icon in the Operation
column. The page for modifying the selected port appears, as shown in Figure 21-16 .