H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 442)

38-7
Figure 38-4 Segment of a RADIUS packet containing an extended attribute
Protocols and Standards
The protocols and standards related to RADIUS include:
RFC 2865: Remote Authentication Dial In User Service (RADIUS)
RFC 2866: RADIUS Accounting
RFC 2867: RADIUS Accounting Modifications for Tunnel Protocol Support
RFC 2868: RADIUS Attributes for Tunnel Protocol Support
RFC 2869: RADIUS Extensions
Configuring RADIUS
Configuration Task List
The RADIUS scheme configured through the Web interface is named system.
If there is no RADIUS scheme named system in the system, when you select Authentication >
RADIUS to enter the RADIUS module, a scheme named system will be created automatically.
Table 38-3 lists the RADIUS configuration steps.
Table 38-3 RADIUS configuration task list
Task Description
Configuring RADIUS
Authentication Servers
Required
Configure the information related to the primary and
secondary RADIUS authentication servers.
By default, no RADIUS authentication server is configured.
Configuring RADIUS
Accounting Servers
Optional
Configure the information related to the primary and
secondary RADIUS accounting servers.
By default, no RADIUS accounting server is configured.
For configuration
details, refer to
Configuring RADIUS
Servers
.