H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 239)

28-3
Table 28-1 Service management configuration items
Item Description
Enable FTP service
Specifies whether to enable the FTP service.
The FTP service is disabled by default.
FTP
ACL
Associates the FTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service
Specifies whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH Enable SSH service
Specifies whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specifies whether to enable the SFTP service.
The SFTP service is disabled by default.
When you enable the SFTP service, the SSH service must be enabled.
Enable HTTP
service
Specifies whether to enable the HTTP service.
The HTTP service is disabled by default.
Port Number
Sets the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
When you modify a port, ensure that the port is not used by other service.
HTTP
ACL
Associates the HTTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
Enable HTTPS
service
Specifies whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Port Number
Sets the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
When you modify a port, ensure that the port is not used by other service.
HTTPS
ACL
Associates the HTTPS service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.