H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 551)

47-1
47
ACL/QoS Configuration Example
Support of the H3C WX series access controllers for features may vary by device model. Refer to
section "Feature Matrixes" in Compatibility Matrixes for details.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
ACL/QoS Configuration Example
Network Requirements
As shown in Figure 47-1 , in the WLAN, the FTP server at IP address 10.1.1.1/24 is connected to the AC,
and the clients access the FTP server through WLAN-ESS1 of the AC.
Configure an ACL and a QoS policy as follows to prohibit the hosts from accessing the FTP server from
8:00 to 18:00 every day:
1) Create an ACL to prohibit the hosts from accessing the FTP server from 8:00 to 18:00 every day.
2) Configure a QoS policy to drop the packets matching the ACL.
3) Apply the QoS policy in the inbound direction of WLAN-ESS1.
Figure 47-1 Network diagram for ACL/QoS configuration