H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 317)

32-8
Figure 32-9 Mesh point to multi-point topology
AP 1 AC
AP 2
AP 3
AP 4
AP 5
Self topology detection and bridging connection
In this topology, MPs automatically detect neighbors and form wireless links to provide wireless
connectivity between LAN segments, as shown Figure 32-10 . Loops are easy to occur in the topology.
In the topology, you can use mesh routes to selectively block redundant links to eliminate loops, and
back up the links when the mesh links fail.
Figure 32-10 Self topology detection and bridging
Configuring Mesh Service
Configuring Mesh Service
Creating a mesh service
Select Wireless Service > Mesh Service from the navigation tree, and click the Mesh Service tab to
enter the mesh service configuration page, as shown in Figure 32-11 :