H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 94)

12-2
Setting Syslog Related Parameters
Select Device > Syslog from the navigation tree, and click the Logset tab to enter the syslog
configuration page, as shown in Figure 12-1 .
Figure 12-1 Set system logs related parameters
Table 12-2 describes the syslog configuration items.
Table 12-2 Syslog configuration items
Item Description
Log Buffer Size Sets the number of logs that can be stored in the log buffer.
Refresh Period
Sets the refresh period on the log information displayed on the Web interface.
You can select manual refresh or automatic refresh:
Manual: You need to click Refresh to refresh the Web interface when displaying
log information.
Automatic: You can select to refresh the Web interface every 1 minute, 5
minutes, or 10 minutes.
Displaying Syslog
Select Device > Syslog from the navigation tree to enter the syslog display page, as shown in Figure
12-2 .