H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 375)

34-20
Field Description
Date Date when the channel or power change occurred
Time Time when the channel or power change occurred
Antenna
Select Radio > Antenna to select an appropriate antenna for the corresponding radio, as shown in
Figure 34-17 .
Figure 34-17 Configure antenna switching
In the Antenna drop-down list, Internal Antenna is displayed for APs supporting internal antennas, the
antenna model is displayed for APs supporting external antennas, and Internal Antenna and the
antenna model are displayed for APs supporting both internal and external antennas..
Configuration Examples
Manual Channel Adjustment Configuration Example
Network requirements
As shown in Figure 34-18 , configure manual channel adjustment on the AC so that the AC can perform
manual channel adjustment when the channel of AP 1 is unavailable.
Figure 34-18 Network diagram for manual channel adjustment configuration
AC L2 Switch AP 1
Client
Configuration procedure
1) Before configuring manual channel adjustment, complete the following task:
Configure AP 1 on the AC to establish a CAPWAP connection between them. For the related
configuration, see Wireless Service.